Kingston 4GB SoDimm DDR3 1333MHz Memory Module
Kingston 4GB SoDimm DDR3 1333MHz Memory Module
Kingston ValueRAM 4GB DDR3 1333 System Memory, 204-pin SoDIMM, CL9, Non-ECC, Unbuffered. Model: KVR1333D4N9/4G.
Availability: Phased Out
Features
Kingston ValueRAM's 512M x 64-bit 4GB (4096MB) DDR3-1333 CL9 SDRAM
(Synchronous DRAM) memory module, based on eight 512M x 8-bit DDR3-1333 FBGA components. The SPD
is programmed to JEDEC standard latency 1333Mhz timing of 9-9-9 at 1.5V. This
204-pin DIMM uses gold contact fingers and requires +1.5V.
- JEDEC standard 1.5V ± 0.075V Power Supply
- VDDQ = 1.5V ± 0.075V
- 667MHz fCK for 1333Mb/sec/pin
- 8 independent internal bank
- Programmable CAS Latency: 5,6,7,8,9,10
- Posted CAS
- Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
- Programmable CAS Write Latency(CWL) = 9(DDR3-1333)
- 8-bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting
address “000” only), 4 with tCCD = 4
- which does not allow seamless read or write [either on the fly using A12
or MRS]
- Bi-directional Differential Data Strobe
- Internal(self) calibration : Internal self calibration through ZQ pin
(RZQ : 240 ohm ± 1%)
- On Die Termination using ODT pin
- Average Refresh Period 7.8us at lower then TCASE 85°C, 3.9us at 85°C <
TCASE . 95°C
- Asynchronous Reset
- 1066Mbps CL7 doesn’t have backward compatibility with 800Mbps CL5
- PCB : Height 1.180” (30.00mm), double sided component
Technical Specifications
Model | KVR1333D4N9/4G. |
Type | 204-Pin DDR3 SoDIMM. |
Capacity | 4GB. |
Speed | DDR3 1333MHz. |
Cache Latency | CL9. |
Voltage | 1.5V. |
Error Checking | Non-ECC. |
DIMM Type | Unbuffered. |
Module Configuration | 512MHz X 64. |
Warranty | Lifetime.
|