Network Accessories / Tools | Sorted by Brand

PUNCH DOWN TOOL cuts and terminates cable into a 110 patch panel or keystone jack. REMOVABLE BLADE of impact style tool with twist and lock sockets can be stored in the tool body for transport. ADJUSTABLE IMPACT force settings (Lo/Hi) for cable termination into a jack, block, or patch panel with 110 IDC terminals

Alantek Cat5e U/UTP Patch Cord are designed to assure high performance. The patch cables are composed of 4-pairs, 24 AWG Stranded. The patch cables are terminated in factory with 8P8C, 50u" gold plated RJ45 Plugs. The boots are molded onto the RJ45 plug to ensure better connection. All Patch Cords are 100% tested in factory to ensure Gigabit performance.

Alantek Cat5E Slim Line 180° Dual IDC Keystone Jack are designed to provide superior performance and reliability. It advanced circuit design provide optimum signal quality allowing it to exceed TIA/EIA and ISO Category 5E performance standards. The Slim design offers a smaller footprint maximizing space in confined area.

Continuity Wire Map Tester will check continuity in your twisted pair (RJ11, RJ12, RJ45) and coaxial (BNC) cables. It not only works as a continuity tester, it also indicates any potential problems via the LED's. Cabling faults such as continuity, open wires, shorts, mis-wiring and crossed-over pairs can be shown. The tester consists of a main Master unit and a detachable Remote unit, each of which have an RJ45 and BNC connecction. The unit is powered with a 9-volt battery (not included).

Dual modular ratchet type crimping tool / Suitable for modular plugs: 8P8C/RJ-45, 6P6C/RJ-12 & 6P4C/RJ11 / Compatible with both stranded & solid wire (UTP/STP) / Built-in cable stripper and cutter / Parallel action for high quality crimping

Fluke Networks? D-Impactor? 5-Pair Impact Tool easily cuts and terminates five copper pairs on a 110 block. This rugged, easy-to-use tool saves time and minimizes hand stress. The patented individually molded blades eliminate the chance of metallic shorts ensuring optimal performance of your network.

The TS?22 Series offers a combination of reliability, durability and expanded utility. TS?22 Test Set has an amplified speaker for hands-free monitoring, DropSafe? reliability passes 20 foot drop test, RainSafe? protection in severe weather conditions, Stores nine 18-digit numbers in repertory dialer (speed dialing)

New ergonomic design, Amplified speaker for hands free monitoring, DropSafe reliability - Passes 20 foot drop test, RainSafe protection and weather proof in severe weather conditions, Hook-flash button, Mute switch, Last number redial, Audible ringer for callbacks, Affordable and reliable.

DataSafe? operation with Superior High Impedance Monitor, Advanced testing functions for low/high voltage and low (mA) current, Always-on Monitor Mode, Ergonomic DropSafe? case, High fidelity, 2-way speakerphone for true hands-free conversations. TS?44 includes Data Lockout, Lockout Override and DSL/POTS filtering

Qualifies cabling performance for 10/100/Gig Ethernet, tests and troubleshoots all copper media cabling: Twisted pair (Category 5 6A), coax, and audio Includes CableIQ Qualification Tester with detachable wiremap adapter, (2) RJ45 RJ 45 patch cord, USB cable, coax 'F' push on adapter, Quick Start Guide, (4) AA batteries, soft carry case

The D914 Automatic Punchdown Impact Tool is the only combination impact and torque tool designed to meet your wire termination requirements. The handle of the D914 is specially designed to accommodate extra blades (sold separately), The D914 also meets all industry requirements for wiring 110, Krone, BIX and 66 blocks. This D914 kit ships with an EverSharp 110 blade.

Link - Determine whether the drop is active, identify its speed, duplex capabilities and service type. 10/100/1000 Mbps. Ping - Verify connectivity to key devices. Cable Verification - Multiple tests help you quickly determine if cable is the problem. Cable Identification - Document unmarked segments, saving you hours of troubleshooting time. CDP/EDP - Precisely determine where network drops terminate on Cisco and Extreme switches

The Link Runner Kit includes Cable ID Kit (#1-8), Wiremap Adapter, RJ-45 coupler, IntelliTone 100 Probe, Clip Set. NiMH battery pack, NiMH battery charger, Custom Carrying Case, PC Inspector Software and Key Device Watch software

The MicroScanner2 Cable Verifier presents a revolutionary change in voice, data, and video cable testing. It starts by taking results from what was four different test modes and displaying them all at once graphical wiremap, pair lengths, distance to fault, cable ID, and far end device. What's more, its integrated RJ11, RJ45, and coax test ports support virtually any type of low-voltage cable testing with no need for awkward adapters. The end result is reduced test time and technician error. That makes high-quality installations more efficient than ever.

This all-in-one crimping tool is designed for Western Electric (WE)/Stewart Stamping (SS)-type, 6- and 8-position modular telephone plugs and more. For ease of use, it is ratchet-controlled and features an embedded flat cable cutter and stripper.

The MicroScanner2 Cable Verifier presents a revolutionary change in voice, data, and video cable testing. It starts by taking results from what was four different test modes and displaying them all at once graphical wiremap, pair lengths, distance to fault, cable ID, and far end device. Whats more, its integrated RJ11, RJ45, and coax test ports support virtually any type of low-voltage cable testing with no need for awkward adapters. The end result is reduced test time and technician error. That makes high-quality installations more efficient than ever.

The IntelliTone? Pro Toner and Probe Series from Fluke Networks is the first toner and probe to offer digital and analog signaling all in one tool. That means it?s equipped with the most powerful cable location technologies for any work environment. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analog mode to isolate individual wire pairs, and trace voice, audio, and video cabling.

Digital tone & probe for clearer signals and easier cable location. Locate cable in a bundle despite signal bleed from cable to cable. Differentiate the tone from noise or a false signal and find a signal easier in active network terminations. Features Specific to IntelliTone 200: Identifies and diagnoses 10/100/1 Gb Ethernet link connectivity with NIC/hub indication, Identifies and diagnoses POTS with Line 2 service and polarity, Validates twisted pair installation with Cablemap capability which identifies common cable miswires.

Sends loud tone up to 10 miles (16 kilometers) on most cables, SmartTone technology provides five distinct tones for exact pair identification, Tone and trace wire on non-active networks, Angled bed-of-nails clips allow easy access to individual pairs, Loud speaker on Probe makes the tone easier to hear through drywall, wood, and other enclosures

TS?19 features DataSafe?, Tone or Pulse operation, Talk/Monitor capabilities and last number redial. High impedance DataSafe? operation in monitor mode, Tone (DTMF) and pulse operation, Last number redial, Polarity indication in talk mode

Light Weight, Strong Cabling Solutions, Easy to Assemble. It is a multi-purpose mounting rack system that allows 19in / ETSI / metric equipment to be mounted in a 42U cabinet. This versatile cabinet is suitable for large cable management from top and bottom for the 800mm wide end frame. Loading capacity is 600KG.

W6-S adopts of 86mm Type wall mount junction box design to deploy into the existing wall jack.It will pose no problem to neighbourhood panels or other decorations.W6-Stransfer rates of up to 300Mbps on the frequency bands for faster file transfers and smoother video streaming.